CS - 7000 - m smart host function introduction S this is the central control console with a flared type microphone unit dedicated hosting S has two groups 8 p - DIN sockets: for system microphone multi-channel connection, a total of 50 sets, can connect each group of the most Can meet 25 sets of receiver unit, increasing the extension units can pick up 150 sets of receiver S panel with functions of limit the number of representatives spoke microphone switch, this system has a "1" "3" and "6" "6" AUTO "1", "3", such as 6 kinds of choice. Mode switch to AUTO, "1", "3" "6" the other side of the detection unit, the machine can speak microphone, microphone is not reach 60 seconds unit , is the main opportunity automatically sends a signal to make the microphone to shut down. Mode switch to "1", "3" "6" there is no this function, the receiver will remain open after opening, if he does not speak When, need to press the switch to stop to speak S a LINE input interface circuit, can be used to play before the meeting recording data, or as a background music playing S a built-in feedback suppression circuit, this system can independently adjust system microphone output volume, convenient manipulation S native support remote conference call function, can access telephone cables and the distance calls on behalf of the party, in real time On a conference call S have an independent headphone output socket and volume, maximum output power is 2 w S balance circuit output interface and non equilibrium output interface, connection mode to adapt to all kinds of equipment. S standard 19 inch rack-mount appearance, beautiful and easy, convenient installation Technical parameters S frequency response: 20 hz - 20 KHZ S power supply voltage: AC220V plus or minus 10% 50 hz S output impedance: REC: 200 Ω The LINE: 200 Ω BALANCE: 300 Ω The LINE OUT: 400 Ω S signal-to-noise ratio: 78 db (1 KHZ THD1 %) S headphone output power: the biggest 2 w S supply receiver power supply: 13 VDC safe voltage S supply microphone nominal power: 150 w S system audio output mode: balanced/unbalanced type S size: 485 x220x62mm (19 "standard rack) international S net weight: 3.5 KG
